Mining and Process Equipment
PRO45427 All steelwork and walkways included. Roof on one side covered with IBR sheeting.
PRO21369 Cyclone does from 1 to 55mm; the -1mm send to spirals
PRO45880 600mm wide. Bin 3×1.5×1.5m high. Screen 1.2x2m with woven wire mesh. 16mm and 25mm aperture. Pulley driven with underpan and discharge chute. Two stockpile conveyors 600mm wide and 13m long. Third stockpile conveyor is 600mm wide and 6m long
PRO31123 with scraper, weigh bin, control cabin and silo for cement storage. The silo is 2.9 m diameter with a 3.9 m barrel and 1.5m cone.
PRO51069 This plant has been designed around a manual operating system. There is no plantwide automated control, PLC, SCADA system or data-logging. Plant operators are responsible for maintaining smooth operation of the process. Overall operation of the plant,
PRO25994 Consist of : crushing section; Duff section; Screening section. Crushing sec: +-50 ton bin with a vibrating feeder, Jeffrey 36 x 42 double rolls primary crusher & 24 x 36 secondary double rolls crusher.
PRO17615 Sandvik QJ340; 29×47″
PRO47872 Track mount, Less than 3000 hours Engin: 44605926, Hours: 841 – new meter (2490), Specs: 17810 x 2890 x 3610 = 35 000kg
PRO17294 comprising: 20x36inch STRB primary crusher,3ft secondary cone crusher, impact crusher for shapping, 11 conveyors, one double deck screen and one triple deck screen, vibrating plate feeder and feed bin.
PRO20109 Track mount, 7m3 bin, Screen: 5x16ft top and 5x12ft bottom deck size, 72kw engine, fine and middle material conveyor: 800mm width, oversize conveyor: 1200mm. Est. mass 29t.
PRO34542 Track mounted. Its a double deck screen
PRO46820 The plant produced 93% sulphuric acid using both pyrite and sulphur as a feedstock. The plant has been standing for 2 years. Shutdown maintenance was last done +-1998 or 1999. Certain items of equipment can be salvaged.
PRO34687 It excludes the xray itself. Supply includes: 12 Ton capacity square conical feed bin (fed by concentrate bins). Small enclosed screen size 2’x4′ with top mounted vibrating motors. This screen feeds an inclined conveyor size 400mm wide x Â
PRO24410 Trommel screen size = 550mm diameter x 1000mm long. 2kW motor with BEW gearbox. James table size = 2m wide x 4.2m long. 3kw, 960 Rpm, 3 phase, 50 Htz. One Envirotech RL 3×2″ pump with 2HP motor also included.
PRO14532 175 -225TPH Coal Washery Plant – fully refurbished condition. 500TPH Coal Crushing Plant new condition. Stacker Conveyor 12mSupaflo Thickener
PRO50026 4m3 feed bin, 22m 600mm wide conveyor, 14x24inch jaw crusher -sold, 2ft STD Symons cone crusher, product conveyor 5m 450mm with all chutes. The crushers are mounted one on top of each other on a solid steel frame.
PRO15838 2x Flowsort xrays. Complete plant, good condition. Designed and supplied by Bond Equipment.
PRO43669 Plant consists of: 2x 6x16ft single deck Vibramech screens, double magnetic drum seperator (900x1900mm), +-800mm diameter cyclone and a spare larger cyclone (ceramic lined) for higher capacity, pumps coupled with motors and receiving tanks. Entire pla
PRO43670 Includes: feed bin, pipe conveyor (used to concentrate pan concentrate material), feed surge bin, DMS, tails conveyor, pump to pump concentrate to sieve bend, de-watering screen, water pumped back to water tank, vibrating screen on top of sort-house,
PRO46366 Plants includes: feed bin/chute, conveyor, single deck screen, conveyor, variable speed electro-magnetic feeder, grease table and final tails conveyor.
PRO43672 Agglomeration plant: 160tph, feed hopper 30m3, belt feeder, 17m conveyor, 45kW agglomeration drum and product conveyor
All copyrights reserved Â© 2018 - MiningCLX.com